Offer #1041
Hydraulic sheet-stamping press model P233A
Manufacturer: TYAZHPRESSMASH
Made in: Russia (Ryazan)
Press is without operation - NEW, 22 years without work. Press can be demonstrated during operation on a prototype.
The press is used to carry out the operations of drawing, hot and cold forming when work-pieces such as bottoms, tanks, reservoirs, boilers are manufactured. It is double-action, vertical, four-arm, presses, with a pull-out table, a hydraulic cushion and a side pusher. The oil hydraulic drive is individual.
Specification:
Rated force exerted by the cross-piece:
-1st stage: 2500 kN
-2nd stage: 5000 kN
-3rd stage: 8000 kN
Rated force of clamping cross-piece:
-1st stage: 2500 kN
-2nd stage: 5000 kN
Rated force of hydraulic cushion: 2500 kN
Motion ofthe cross-piece (drawing and clamping): 1700 mm
Max. distance between the table and the drawing cross-piece: 2600 mm
Dimensions of the table: 2650x2650 mm
Speed of the cross-piece in double-action and single-action presses:
-Idle run: 200 mm/s
-Backstroke: 200 mm/s
-Working stroke for double action: 32 mm/s
-Working stroke for single action: 10 mm/s
Rated pressure: 20 MPa
Total installed power of all electric motors: 299.5 kW
Dimensions of the press:
-Length: 15220 mm
-Width: 8620 mm
-Height above the floor level: 7730 mm
Press the OFFER LINK button and then copy this link by pressing Ctrl + C or press the OFFER LINK button and then right mouse click on the selected text and choose `Copy`.
